These white bath tub splash guards are constructed of rigid plastic and include a left and right corner piece. Each piece features a water-deflecting wing which curves in 2-3/8 inches towards the tub, designed to redirect flow of excess water back into the tub. These rigid, non-adjustable, corner-fitting splash guards come with a 90 degree angle, designed for tight-fitting corner installations. These splash guards are best installed with a clear or white silicone-based adhesive product, but wall and tub surfaces should be cleaned prior with alcohol to provide for a clean and permanent bond. Silicone adhesive is not provided with this item and must be purchased separately. Application of silicone adhesives should be followed as per manufacturer’s instructions. *Installation Tip: Once surfaces has been cleaned and splash guards have been set in place with silicone, allow 24 hours for curing prior to exposing to moisture.
